[LWS4]int e0/0/3 [LWS4-Ethernet0/0/3]un sh Info: Interface Ethernet0/0/3 is not shutdown. [LWS4-Ethernet0/0/3]port link-t a [LWS4-Ethernet0/0/3]port de vlan 10 [LWS4-Ethernet0/0/3]int e0/0/4 [LWS4-Ethernet0/0/4]un sh Info: Interface Ethernet0/0/4 is not shutdown. [LWS4-Ethernet0/0/4]port link-t a [LWS4-Ethernet0/0/4]port de vlan 20 [LWS4-Ethernet0/0/4]int e0/0/1 [LWS4-Ethernet0/0/1]un sh Info: Interface Ethernet0/0/1 is not shutdown. [LWS4-Ethernet0/0/1]port link-t t [LWS4-Ethernet0/0/1]port t allow vlan all [LWS4-Ethernet0/0/1]int e0/0/2 [LWS4-Ethernet0/0/2]un sh Info: Interface Ethernet0/0/2 is not shutdown. [LWS4-Ethernet0/0/2]port link-t t [LWS4-Ethernet0/0/2]port t allow vlan all [LWS4-Ethernet0/0/2]quit
启动stp并保存配置
1 2 3 4 5 6 7 8 9
[LWS4]stp mode stp Info: This operation may take a few seconds. Please wait for a moment...done. [LWS4]quit <LWS4>save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 0. Save the configuration successfully.
<Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]un in en Info: Information center is disabled. [Huawei]sys LWS5 [LWS5]vlan 30 [LWS5-vlan30]vlan 40 [LWS5-vlan40]quit [LWS5]int e0/0/3 [LWS5-Ethernet0/0/3]un shu Info: Interface Ethernet0/0/3 is not shutdown. [LWS5-Ethernet0/0/3]port link-t a [LWS5-Ethernet0/0/3]port de vlan 30 [LWS5-Ethernet0/0/3]int e0/0/4 [LWS5-Ethernet0/0/4]un sh Info: Interface Ethernet0/0/4 is not shutdown. [LWS5-Ethernet0/0/4]port link-t a [LWS5-Ethernet0/0/4]port de vlan 40 [LWS5-Ethernet0/0/4]int e0/0/1 [LWS5-Ethernet0/0/1]un sh Info: Interface Ethernet0/0/1 is not shutdown. [LWS5-Ethernet0/0/1]port link-t t [LWS5-Ethernet0/0/1]port t allow vlan all [LWS5-Ethernet0/0/1]int e0/0/2 [LWS5-Ethernet0/0/2]un sh Info: Interface Ethernet0/0/2 is not shutdown. [LWS5-Ethernet0/0/2]port link-t t [LWS5-Ethernet0/0/2]port t allow vlan all [LWS5-Ethernet0/0/2]quit [LWS5]stp mode stp Info: This operation may take a few seconds. Please wait for a moment...done. [LWS5]quit <LWS5>save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 0. Save the configuration successfully.
<Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]un in en Info: Information center is disabled. [Huawei]sys LWS6 [LWS6]vlan 50 [LWS6-vlan50]vlan 60 [LWS6-vlan60]quit [LWS6]int e0/0/2 [LWS6-Ethernet0/0/2]un sh Info: Interface Ethernet0/0/2 is not shutdown. [LWS6-Ethernet0/0/2]port link-t a [LWS6-Ethernet0/0/2]port de vlan 50 [LWS6-Ethernet0/0/2]int e0/0/3 [LWS6-Ethernet0/0/3]un sh Info: Interface Ethernet0/0/3 is not shutdown. [LWS6-Ethernet0/0/3]port link-t a [LWS6-Ethernet0/0/3]port de vlan 60 [LWS6-Ethernet0/0/3]int e0/0/1 [LWS6-Ethernet0/0/1]un sh Info: Interface Ethernet0/0/1 is not shutdown. [LWS6-Ethernet0/0/1]port link-t t [LWS6-Ethernet0/0/1]port t allow vlan all [LWS6-Ethernet0/0/1]quit [LWS6]quit <LWS6>save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 0. Save the configuration successfully.
▲S1：
创建VLAN
1 2 3 4 5 6 7 8 9 10 11
<Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]un in en Info: Information center is disabled. [Huawei]sys LWS1 [LWS1]vlan 10 [LWS1-vlan10]vlan 20 [LWS1-vlan20]vlan 30 [LWS1-vlan30]vlan 40 [LWS1-vlan40]vlan 70 [LWS1-vlan70]quit
[LWS1]int g0/0/1 [LWS1-GigabitEthernet0/0/1]un sh Info: Interface GigabitEthernet0/0/1 is not shutdown. [LWS1-GigabitEthernet0/0/1]port link-t a [LWS1-GigabitEthernet0/0/1]port de vlan 70 [LWS1-GigabitEthernet0/0/1]quit [LWS1]int g0/0/2 [LWS1-GigabitEthernet0/0/2]un sh Info: Interface GigabitEthernet0/0/2 is not shutdown. [LWS1-GigabitEthernet0/0/2]port link-t t [LWS1-GigabitEthernet0/0/2]port t allow vlan all [LWS1-GigabitEthernet0/0/2]int g0/0/3 [LWS1-GigabitEthernet0/0/3]un sh Info: Interface GigabitEthernet0/0/3 is not shutdown. [LWS1-GigabitEthernet0/0/3]port link-t t [LWS1-GigabitEthernet0/0/3]port t allow vlan all [LWS1-GigabitEthernet0/0/3]int g0/0/4 [LWS1-GigabitEthernet0/0/4]un sh Info: Interface GigabitEthernet0/0/4 is not shutdown. [LWS1-GigabitEthernet0/0/4]port link-t t [LWS1-GigabitEthernet0/0/4]port t allow vlan all [LWS1-GigabitEthernet0/0/4]quit
开启stp并设置为根桥(优先级为0)
1 2 3
[LWS1]stp mode stp Info: This operation may take a few seconds. Please wait for a moment...done. [LWS1]stp prio 0
<LWS1>save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 0.. Save the configuration successfully.
OSPF
可以先用dis ip int br查看所有IP，再宣告网段
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
[LWS1]ospf 1 [LWS1-ospf-1]area 0.0.0.0 [LWS1-ospf-1-area-0.0.0.0]net 192.168.10.0 0.0.0.255 [LWS1-ospf-1-area-0.0.0.0]net 192.168.20.0 0.0.0.255 [LWS1-ospf-1-area-0.0.0.0]net 192.168.30.0 0.0.0.255 [LWS1-ospf-1-area-0.0.0.0]net 192.168.40.0 0.0.0.255 [LWS1-ospf-1-area-0.0.0.0]net 192.168.70.0 0.0.0.255 [LWS1-ospf-1-area-0.0.0.0]quit [LWS1-ospf-1]quit [LWS1]quit <LWS1>save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Now saving the current configuration to the slot 0. Save the configuration successfully.
<Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]un in en Info: Information center is disabled. [Huawei]sys LWS2 [LWS2]vlan 10 [LWS2-vlan10]vlan 20 [LWS2-vlan20]vlan 30 [LWS2-vlan30]vlan 40 [LWS2-vlan40]vlan 80 [LWS2-vlan80]quit [LWS2]int g0/0/1 [LWS2-GigabitEthernet0/0/1]un sh Info: Interface GigabitEthernet0/0/1 is not shutdown. [LWS2-GigabitEthernet0/0/1]port link-t a [LWS2-GigabitEthernet0/0/1]port de vlan 80 [LWS2-GigabitEthernet0/0/1]int g0/0/2 [LWS2-GigabitEthernet0/0/2]un sh Info: Interface GigabitEthernet0/0/2 is not shutdown. [LWS2-GigabitEthernet0/0/2]port link-t t [LWS2-GigabitEthernet0/0/2]port t allow vlan all [LWS2-GigabitEthernet0/0/2]int g0/0/3 [LWS2-GigabitEthernet0/0/3]un sh Info: Interface GigabitEthernet0/0/3 is not shutdown. [LWS2-GigabitEthernet0/0/3]port link-t t [LWS2-GigabitEthernet0/0/3]port t allow vlan all [LWS2-GigabitEthernet0/0/3]int g0/0/4 [LWS2-GigabitEthernet0/0/4]un sh Info: Interface GigabitEthernet0/0/4 is not shutdown. [LWS2-GigabitEthernet0/0/4]port link-t t [LWS2-GigabitEthernet0/0/4]port t allow vlan all [LWS2-GigabitEthernet0/0/4]quit [LWS2]int vlan 10 [LWS2-Vlanif10]ip add 192.168.10.254 24 [LWS2-Vlanif10]vrrp vrid 10 vi 192.168.10.1 [LWS2-Vlanif10]int vlan 20 [LWS2-Vlanif20]ip add 192.168.20.254 24 [LWS2-Vlanif20]vrrp vrid 20 vi 192.168.20.1 [LWS2-Vlanif20]int vlan 30 [LWS2-Vlanif30]ip add 192.168.30.254 24 [LWS2-Vlanif30]vrrp vrid 30 vi 192.168.30.1 [LWS2-Vlanif30]vrrp vrid 30 prio 120 [LWS2-Vlanif30]vrrp vrid 30 track int g0/0/1 reduce 30 [LWS2-Vlanif30]int vlan 40 [LWS2-Vlanif40]ip add 192.168.40.254 24 [LWS2-Vlanif40]vrrp vrid 40 vi 192.168.40.1 [LWS2-Vlanif40]vrrp vrid 40 prio 120 [LWS2-Vlanif40]vrrp vrid 40 track int g0/0/1 reduce 30 [LWS2-Vlanif40]int vlan 80 [LWS2-Vlanif80]ip add 192.168.80.254 24 [LWS2-Vlanif80]quit [LWS2]stp mode stp Info: This operation may take a few seconds. Please wait for a moment...done. [LWS2]stp prio 4096 [LWS2]quit <LWS2>save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 0. Save the configuration successfully.
[LWS2]ospf 1 [LWS2-ospf-1]area 0.0.0.0 [LWS2-ospf-1-area-0.0.0.0]net 192.168.10.0 0.0.0.255 [LWS2-ospf-1-area-0.0.0.0]net 192.168.20.0 0.0.0.255 [LWS2-ospf-1-area-0.0.0.0]net 192.168.30.0 0.0.0.255 [LWS2-ospf-1-area-0.0.0.0]net 192.168.40.0 0.0.0.255 [LWS2-ospf-1-area-0.0.0.0]net 192.168.80.0 0.0.0.255 [LWS2-ospf-1-area-0.0.0.0]quit [LWS2-ospf-1]quit [LWS2]quit <LWS2>save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Now saving the current configuration to the slot 0. Save the configuration successfully.
<Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]un in en Info: Information center is disabled. [Huawei]sys LWS3 [LWS3]vlan 50 [LWS3-vlan50]vlan 60 [LWS3-vlan60]vlan 90 [LWS3-vlan90]quit [LWS3]int g0/0/2 [LWS3-GigabitEthernet0/0/2]un sh Info: Interface GigabitEthernet0/0/2 is not shutdown. [LWS3-GigabitEthernet0/0/2]port link-t t [LWS3-GigabitEthernet0/0/2]port t allow vlan all [LWS3-GigabitEthernet0/0/2]int g0/0/1 [LWS3-GigabitEthernet0/0/1]un sh Info: Interface GigabitEthernet0/0/1 is not shutdown. [LWS3-GigabitEthernet0/0/1]port link-t a [LWS3-GigabitEthernet0/0/1]port de vlan 90 [LWS3-GigabitEthernet0/0/1]quit [LWS3]int vlan 50 [LWS3-Vlanif50]ip add 192.168.50.1 24 [LWS3-Vlanif50]int vlan 60 [LWS3-Vlanif60]ip add 192.168.60.1 24 [LWS3-Vlanif60]int vlan 90 [LWS3-Vlanif90]ip add 192.168.90.1 24 [LWS3-Vlanif90]quit [LWS3]dhcp en Info: The operation may take a few seconds. Please wait for a moment.done. [LWS3]ip pool vlan50 Info:It's successful to create an IP address pool. [LWS3-ip-pool-vlan50]gateway-list 192.168.50.1 [LWS3-ip-pool-vlan50]net 192.168.50.0 mask 255.255.255.0 [LWS3-ip-pool-vlan50]quit [LWS3]ip pool vlan60 Info:It's successful to create an IP address pool. [LWS3-ip-pool-vlan60]gateway-list 192.168.60.1 [LWS3-ip-pool-vlan60]net 192.168.60.0 mask 255.255.255.0 [LWS3-ip-pool-vlan60]quit [LWS3]quit [LWS3]int vlan50 [LWS3-Vlanif50]dhcp select global [LWS3-Vlanif50]int vlan60 [LWS3-Vlanif60]dhcp select global [LWS3-Vlanif60]quit [LWS3]quit <LWS3>save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 0. Save the configuration successfully.
[LWS3]ospf 1 [LWS3-ospf-1]area 0.0.0.0 [LWS3-ospf-1-area-0.0.0.0]net 192.168.90.0 0.0.0.255 [LWS3-ospf-1-area-0.0.0.0]net 192.168.50.0 0.0.0.255 [LWS3-ospf-1-area-0.0.0.0]net 192.168.60.0 0.0.0.255 [LWS3-ospf-1-area-0.0.0.0]quit [LWS3-ospf-1]quit [LWS3]quit <LWS3>save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Now saving the current configuration to the slot 0. Save the configuration successfully.
<Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]un in en Info: Information center is disabled. [Huawei]sys LWR1 [LWR1]int e0/0/1 [LWR1-Ethernet0/0/1]un sh Info: Interface Ethernet0/0/1 is not shutdown. [LWR1-Ethernet0/0/1]ip add 192.168.70.50 24 [LWR1-Ethernet0/0/1]int g0/0/0 [LWR1-GigabitEthernet0/0/0]ip add 192.168.80.50 24 [LWR1-GigabitEthernet0/0/0]int e0/0/0 [LWR1-Ethernet0/0/0]ip add 192.168.100.50 24 [LWR1-Ethernet0/0/0]quit [LWR1]quit <LWR1>save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 17. Save the configuration successfully. <LWR1>sys Enter system view, return user view with Ctrl+Z.
[LWR1]ospf 1 [LWR1-ospf-1]area 0.0.0.0 [LWR1-ospf-1-area-0.0.0.0]net 192.168.70.0 0.0.0.255 [LWR1-ospf-1-area-0.0.0.0]net 192.168.80.0 0.0.0.255 [LWR1-ospf-1-area-0.0.0.0]net 192.168.100.0 0.0.0.255 [LWR1-ospf-1-area-0.0.0.0]quit [LWR1-ospf-1]quit [LWR1]quit <LWR1>save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Now saving the current configuration to the slot 17. Save the configuration successfully.
<Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]un in en Info: Information center is disabled. [Huawei]sys LWR2 [LWR2]int e0/0/0 [LWR2-Ethernet0/0/0]un sh Info: Interface Ethernet0/0/0 is not shutdown. [LWR2-Ethernet0/0/0]ip add 192.168.100.51 24 [LWR2-Ethernet0/0/0]int e0/0/1 [LWR2-Ethernet0/0/1]ip add 192.168.110.51 24 [LWR2-Ethernet0/0/1]quit
[LWR2]ospf 1 [LWR2-ospf-1]area 0.0.0.0 [LWR2-ospf-1-area-0.0.0.0]net 192.168.100.0 0.0.0.255 [LWR2-ospf-1-area-0.0.0.0]net 192.168.110.0 0.0.0.255 [LWR2-ospf-1-area-0.0.0.0]quit [LWR2-ospf-1]qu [LWR2]qu <LWR2>save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 17. Save the configuration successfully.
<Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]un in en Info: Information center is disabled. [Huawei]sys LWR3 [LWR3]int e0/0/0 [LWR3-Ethernet0/0/0]ip add 192.168.110.50 24 [LWR3-Ethernet0/0/0]int e0/0/1 [LWR3-Ethernet0/0/1]ip add 192.168.90.50 24 [LWR3-Ethernet0/0/1]quit [LWR3]ospf 1 [LWR3-ospf-1]area 0.0.0.0 [LWR3-ospf-1-area-0.0.0.0]net 192.168.90.0 0.0.0.255 [LWR3-ospf-1-area-0.0.0.0]net 192.168.110.0 0.0.0.255 [LWR3-ospf-1-area-0.0.0.0]quit [LWR3-ospf-1]quit [LWR3]quit <LWR3>save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 17. Save the configuration successfully.
