<H3C>sys System View: return to User View with Ctrl+Z. [H3C]sys S1 [S1]vlan 10 [S1-vlan10]vlan 20 [S1-vlan20]quit [S1]int g1/0/1 [S1-GigabitEthernet1/0/1]no sh [S1-GigabitEthernet1/0/1]port link-type access [S1-GigabitEthernet1/0/1]port access vlan 10 [S1-GigabitEthernet1/0/1]quit [S1]int g1/0/2 [S1-GigabitEthernet1/0/2]no sh [S1-GigabitEthernet1/0/2]port link-t a [S1-GigabitEthernet1/0/2]port a vlan 20 [S1-GigabitEthernet1/0/2]quit [S1]int g1/0/3 [S1-GigabitEthernet1/0/3]no sh [S1-GigabitEthernet1/0/3]port link-t t [S1-GigabitEthernet1/0/3]port t p vlan all [S1-GigabitEthernet1/0/3]quit [S1]save The current configuration will be written to the device. Are you sure? [Y/N]:y Please input the file name(*.cfg)[flash:/startup.cfg] (To leave the existing filename unchanged, press the enter key): Validating file. Please wait... Saved the current configuration to mainboard device successfully.
[S2]vlan 30 [S2-vlan30]vlan 40 [S2-vlan40]int g1/0/1 [S2-GigabitEthernet1/0/1]no sh [S2-GigabitEthernet1/0/1]port link-t a [S2-GigabitEthernet1/0/1]port a vlan 30 [S2-GigabitEthernet1/0/1]int g1/0/2 [S2-GigabitEthernet1/0/2]no sh [S2-GigabitEthernet1/0/2]port link-t a [S2-GigabitEthernet1/0/2]port a vlan 40 [S2-GigabitEthernet1/0/2]int g1/0/3 [S2-GigabitEthernet1/0/3]no sh [S2-GigabitEthernet1/0/3]port link-t t [S2-GigabitEthernet1/0/3]port t p vlan all [S2-GigabitEthernet1/0/3]quit [S2]save The current configuration will be written to the device. Are you sure? [Y/N]:y Please input the file name(*.cfg)[flash:/startup.cfg] (To leave the existing filename unchanged, press the enter key): Validating file. Please wait... Saved the current configuration to mainboard device successfully.
[S0]vlan 10 [S0-vlan10]vlan 20 [S0-vlan20]vlan 30 [S0-vlan30]vlan 40 [S0-vlan40]vlan 50 [S0-vlan50]quit [S0]int g1/0/1 [S0-GigabitEthernet1/0/1]no sh [S0-GigabitEthernet1/0/1]port link-t t [S0-GigabitEthernet1/0/1]port t p vlan all [S0-GigabitEthernet1/0/1]int g1/0/2 [S0-GigabitEthernet1/0/2]no sh [S0-GigabitEthernet1/0/2]port link-t t [S0-GigabitEthernet1/0/2]port t p vlan all [S0-GigabitEthernet1/0/2]int g1/0/3 [S0-GigabitEthernet1/0/3]no sh [S0-GigabitEthernet1/0/3]port link-t a [S0-GigabitEthernet1/0/3]port a vlan 50 [S0-GigabitEthernet1/0/3]quit [S0]dhcp enable [S0]int vlan 10 [S0-Vlan-interface10]%Sep 16 18:50:17:155 2019 S0 IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface10 changed to up. %Sep 16 18:50:17:155 2019 S0 IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface10 changed to up. ip add 192.168.10.1 255.255.255.0 [S0-Vlan-interface10]dhcp select relay [S0-Vlan-interface10]dhcp relay server-address 192.168.50.2 [S0-Vlan-interface10]int vlan 20 [S0-Vlan-interface20]%Sep 16 18:52:05:444 2019 S0 IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface20 changed to up. %Sep 16 18:52:05:444 2019 S0 IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface20 changed to up. ip add 192.168.20.1 255.255.255.0 [S0-Vlan-interface20]dhcp select relay [S0-Vlan-interface20]dhcp relay server-address 192.168.50.2 [S0-Vlan-interface20]int vlan 30 [S0-Vlan-interface30]%Sep 16 18:52:26:073 2019 S0 IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface30 changed to up. %Sep 16 18:52:26:073 2019 S0 IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface30 changed to up. ip add 192.168.30.1 255.255.255.0 [S0-Vlan-interface30]dhcp select relay [S0-Vlan-interface30]dhcp relay server-address 192.168.50.2 [S0-Vlan-interface30]int vlan 40 [S0-Vlan-interface40]%Sep 16 18:52:47:327 2019 S0 IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface40 changed to up. %Sep 16 18:52:47:327 2019 S0 IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface40 changed to up. ip add 192.168.40.1 255.255.255.0 [S0-Vlan-interface40]dhcp select relay [S0-Vlan-interface40]dhcp relay server-address 192.168.50.2 [S0-Vlan-interface40]int vlan 50 [S0-Vlan-interface50]%Sep 16 18:53:08:122 2019 S0 IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface50 changed to up. %Sep 16 18:53:08:122 2019 S0 IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface50 changed to up. ip add 192.168.50.1 255.255.255.0 [S0-Vlan-interface50]quit [S0]save The current configuration will be written to the device. Are you sure? [Y/N]:y Please input the file name(*.cfg)[flash:/startup.cfg] (To leave the existing filename unchanged, press the enter key): Validating file. Please wait... Saved the current configuration to mainboard device successfully.
[R]int g0/0 [R-GigabitEthernet0/0]no sh [R-GigabitEthernet0/0]ip add 192.168.50.2 255.255.255.0 [R-GigabitEthernet0/0]quit [R]dhcp en [R]dhcp server ip-pool vlan10 [R-dhcp-pool-vlan10]network 192.168.10.1 mask 255.255.255.0 [R-dhcp-pool-vlan10]gateway-list 192.168.10.1 [R-dhcp-pool-vlan10]quit [R]dhcp server ip-pool vlan20 [R-dhcp-pool-vlan20]network 192.168.20.1 mask 255.255.255.0 [R-dhcp-pool-vlan20]gateway-list 192.168.20.1 [R-dhcp-pool-vlan20]quit [R]dhcp server ip-pool vlan30 [R-dhcp-pool-vlan30]network 192.168.30.1 mask 255.255.255.0 [R-dhcp-pool-vlan30]gateway-list 192.168.30.1 [R-dhcp-pool-vlan30]quit [R]dhcp server ip-pool vlan40 [R-dhcp-pool-vlan40]network 192.168.40.1 mask 255.255.255.0 [R-dhcp-pool-vlan40]gateway-list 192.168.40.1 [R-dhcp-pool-vlan40]quit [R]ip route-static 192.168.0.0 255.255.0.0 g0/0 192.168.50.1 [R]save The current configuration will be written to the device. Are you sure? [Y/N]:y Please input the file name(*.cfg)[flash:/startup.cfg] (To leave the existing filename unchanged, press the enter key): Validating file. Please wait... Configuration is saved to device successfully.